Key points for installing angular contact ball bearings

1. Preliminary preparation:
Before installing angular contact ball bearings, first ensure that the working environment is clean to prevent dust and other impurities from entering the bearings. At the same time, check the mating surfaces of the bearings and seats to ensure that they are smooth and undamaged.

2. Installation process:
Correct installation position: Ensure that the bearings are installed in the correct position and are well aligned with other parts of the machine. Avoid unnecessary axial loads on the bearings.
Suitable fasteners: Use appropriate fasteners to fix the bearings in place. Avoid overtightening or over-loosening to avoid damage to the bearings.
Correct lubrication: During installation, apply an appropriate amount of lubricant to the bearings to reduce friction and wear. At the same time, check and replace the lubricant regularly to keep the bearings in good working condition.

3. Post-installation inspection:
After completing the installation, perform a simple running test to observe the operation of the bearings. If there is abnormal sound, heat or other abnormal phenomena, the machine should be stopped immediately for inspection and appropriate measures should be taken.
In addition, there are some details worth noting:
Avoid barbaric operation: During installation, avoid using violence or improper tools. So as not to damage the bearings or affect their service life.
Keep the bearings clean: Keep the bearings clean before and after installation. Avoid dust, moisture and other impurities from entering the bearings.
Follow the installation instructions: Strictly follow the installation instructions of the bearings. If in doubt, consult a professional or manufacturer in time.

Correct installation of angular contact ball bearings is essential for the smooth and efficient operation of the machine. By following the above installation points and precautions, you can ensure that the bearings are in good working condition, thereby extending the life of the machine and improving work efficiency. Choose high-quality angular contact ball bearings and install them correctly to keep your machine running worry-free!